For anyone tired of manually covering their own pool, automated pool covers are an perfect option. However, these accessories may be pretty pricey, so once you buy one, you would like to be sure it lasts.
You’ll have several options when installing an automatic pool cover, depending on your setup, goals, and budget. While technically, you could install the system yourself, it does take quite a bit of knowledge of electronics and some skill to properly ensconce it in the edge of your pool. If you’re not comfortable doing it yourself, you can always hire a pro from the resources like poolenclosures-poolcovers.com.au
Image Source: Google
Have a look at these five important methods for caring for yours so that it lasts just as long as you can.
It is inevitable that leaves debris, snow, and ice may collect on the vinyl if it is stretched across the water. It is important to wash them away whenever possible. The additional weight may strain the plastic, in addition to the reel parts that help unroll automated pool covers.
Utilize a telescopic brush to wash lightly away snow, leaves, and other debris. If water has collected on the outside, use a little pump to eliminate it.
The water level in a swimming pool is essential to keeping your cover. Water must hit at roughly mid-skimmer. If it's greater than that time, the reel parts and system might be flooded.
At least twice to three times per year, automated pool covers must be washed to remove chemical residue which could cause them to glow more quickly. When any water collects on the surface once you are finished, you may use a pump to eliminate it.